Material Safety Data Sheet

Symphony Scents

256 Broadway

Fort Edward, NY 12828

518-632-4802

Identification	Name: Multibase-EL1 Preparer: Vitapur Inc. of Ville St-Laurent, Quebec
Composition, Information on Ingredients	Ingredients CAS Number Glycerin 56-81-5 Glycol Monostearate 111-60-4 Acrylamide Copolymer 9003-06-9 Octyldodecanol 5333-42-6 Isopropyl Myristate 110-27-0 Isopropyl Palmitate 142-91-6 PEG-20 Glyceryl Stearate N/A Ceteareth-14 N/A Polysorbate 85 9005-70-3 Water 0007732-18-5 Goat Milk (if present) N/A Aloe Vera Extract 85507-70-3 Propylene Glycol 57-55-6 Diazolidinyl Urea 78491-02-08 3-Iodo-2-propynylbutylcarbamate N/A
Health Hazard Information	Acute Health Effects: May cause mild eye irritation. Ingestion may cause irritation. Chronic Health Effects: None known Routes of exposure: Eyes, skin contact Target Organs: Eyes, Skin Carcinogenic Status: The components of this mixture are not known to be listed or regulated by IARC, NTP, OSHA, or ACGTH.
Emergency and First Aid Procedures	Eye contact: Immediately flush eyes with plenty of clean water for an extended time, not less than five minutes. Flush longer if there is any indication of residual chemical in the eyes. Ensure adequate flushing of the eyes by separating the eyelids with fingers and roll eyes in a circular motion. Skin contact: Wash the affected area thoroughly with plenty of water and soap. Ingestion: No ingestion effects known. Treat symptomatically. See a physician.
Fire Fighting Measures	NFPA Flammability Class: N/A Flash point: > 212 F (100 C) Explosive Range: N/A
Handling and Storage	Avoid eye contact. Avoid drinking, tasting, swallowing, or ingesting this product. Storage shelf life: 12 months.
Physical and Chemical Properties	Appearance @ room temperature: Firm Paste Color: Pure White Odor: Mild, Fresh Acid Value: 1.0 Max PH 10% (aq. sol'n): 4.5-5.5 Clear Point, C*: 45-55
Stability and Reactivity	This product is stable. Hazardous polymerization will not occur.
Conditions to Avoid	Poor mixing: Bottle variations may occur. Non-differentiated shear: Emulsion should be made with higher shear, subsequently good mixing at low shear is recommended in the cool down process. Pump: Too-small nozzle size may apply additional variable shear to the emulsion.

The information contained in this material safety data sheet was obtained from current and reliable sources. This data is supplied without warranty, expressed or implied, regarding its correctness or accuracy. It is the user's responsibility to determine safe conditions for use of this product and to assume liability for loss, injury, damage or expense resulting from improper use of this product.